Book Edition:

- Susheel Kalia and Luc Avérous (Eds).Biopolymers: Biomedical And Environmental Applications. John Wiley & Scrivener Pub. Pub Date: 07/2011. 642 p. ISBN: 978047063923

- L. Avérous and E. Pollet (Eds). Environmental Silicate Nano-biocomposites. Springer-Verlag (London). Publication  08/2012, 461 p. ISBN : 978-1-4471-4101-3

- Peter Halley & Luc Avérous (Eds). Starch Polymers. From Genetic Engineering to Green Applications, 1st Edition. Elsevier Limited Publication. Publication April 2014, 485 p. ISBN : 978-0-4445-37317

- Susheel Kalia & Luc Avérous (Eds). Biodegradable and bio-based polymers for Biomedical And Environmental Applications. John Wiley & Scrivener Publishing. Publicat. Date: 02/2016. 350 p. ISBN: 978-1119117339

Articles - International Journals:

2000

- Avérous L, Moro L, Dole P, Fringant C. (2000) “Properties of thermoplastics blends: starch-polycaprolactone.” Polymer. Vol. 41, N°11, pp 4157-4167. Abstract (PDF) >>Highly cited paper<<

- Avérous L, Fauconnier N., Moro L, Fringant C. (2000) “Blends of thermoplastic starch and polyesteramide: Processing and properties.” Journal of Applied Polymer Science. vol. 76, N°7, pp. 1117-1128. Abstract

2001

- Avérous L., Fringant C. (2001) “Association between plasticized starch and polyesters: processing and performances of injected biodegradable systems.” Polym Eng. Sci., Vol. 41, N°5, pp. 727-734. Abstract

- Martin O., Avérous L. (2001). “Poly(lactic acid): plasticization and properties of biodegradable multiphase systems.” Polymer, vol 42, N° 14, pp. 6237-6247. Abstract >>Highly cited paper<<

- Avérous L., Fringant C., Moro L. (2001). “Starch-based biodegradable materials suitable for Thermoforming Packaging.” Starch/Starke, Vol. 53, N°8. pp. 368-371. Proof (Full-text)

- Avérous L., Fringant C., Moro L. (2001). “Plasticized starch-cellulose interactions in polysaccharide composites.” Polymer, Vol 42, N° 15, pp. 6571-6578. Abstract

- Martin O., Schwach E., Avérous L, Couturier Y. (2001). “Properties of Biodegradable Multilayer Films Based on Plasticized Wheat Starch.” Starch/Starke, vol.53, N°8. pp. 372-380. Abstract

2002

- Martin O, Avérous L (2002). “Comprehensive experimental study of a starch/polyesteramide coextrusion.“ Journal of Applied Polymer Science. Vol. 86, N°10, pp. 2586-2600. Abstract

2003

- Pouteau C., Dole P., Cathala B., Avérous L., Boquillon N. (2003) “Antioxidant properties of lignin in polypropylene”, Polymer Degradation and Stability. vol. 81, N°1, pp 9-18. Abstract

- Martin O, Avérous L, Della Valle G (2003). “Inline determination of plasticized wheat starch viscous behaviour: Impact of processing.” Carbohydrate Polymer. Vol. 53 N°2, pp. 169-182. Abstract

2004

- Le Digabel F., Boquillon N., Dole P., Monties B., Averous L. (2004) “Properties of thermoplastic composites based on wheat straw lignocellulosic fillers”. Journal of Applied Polymer Science. vol. 93 N°1 pp. 428-436. Abstract

- Avérous L., Boquillon N. (2004). “Biocomposites based on plasticized starch: thermal and mechanical behaviours”. Carbohydrate Polymers. Vol. 56 N°2 pp. 111-122. Abstract

- Avérous L (2004). “Biodegradable multiphase systems based on plasticized starch: a review.” Journal of Macromolecular Science—Part C, Polymer Reviews. vol. C4, N°3, pp. 231-274. Full-text (Zip/PDF)

- Schwach E., Averous L. (2004). “Starch-based biodegradable blends: morphology and interface properties”. Polymer International. Vol. 53 N°12 pp. 2115-2124. Abstract

2005

- Dole P., Avérous L., Joly C., Della Valle G., Bliard C. (2005) “Evaluation of PE-starch multilayers: Processing and properties.”. Polym. Eng. Sci., vol. 45 N°2. pp. 217-224. Abstract

- Belard L., Dole P., Avérous L. (2005). « Current progress on biodegradable materials, based on plasticized starch ». Australian Journal of Chemistry, Vol. 58, N°6, pp. 457–460. Abstract (PDF)

2006

- Averous L., Le Digabel F. (2006)."Properties of biocomposites based on lignocellulosic fillers" Carbohydrate Polymers. Vol. 66, pp. 480-493. Proof (Fulltext)

- Le Digabel F., Avérous L., (2006). "Effects of lignin content on the properties of lignocellulose-based biocomposites" Carbohydrate Polymers. Vol. 66, pp. 537-545. Proof (Full-text)

- Chivrac F., Kadlecová Z., Pollet E., Avérous L. (2006). "Aromatic Copolyester-Based Nano-Biocomposites: Elaboration, Structural Characterization and Properties" Journal of Polymers and the Environment, Vol. 14 N°4, pp. 393-401. Proof (Full-text)

2007

- Chivrac F., Pollet E., Avérous L. (2007). "Non-isothermal Crystallization Behavior of Poly(butylene adipate-co-terephthalate)/Clay Nano-biocomposites" Journal of Polymer Science Part B: Polymer Physics, Vol. 45 N°13, pp. 1503-1510 Abstract (PDF)

- Averous L. (2007). "Cellulose-based biocomposites: comparison of different multiphasic systems" Composite Interfaces, Vol. 14, N° 7–9, pp. 787–805. Abstract-Proof (PDF)

2008

- Hablot E., Bordes P., Pollet E., Avérous L. (2008) “Thermal and thermo-mechanical degradation of poly(3-hydroxybutyrate)-based multiphase systems” Polymer Degradation & Stability, Vol. 93, N°2, pp. 413-421. Abstract

- Chivrac F., Pollet E., Schmutz, M., Avérous L. (2008) “New approach to elaborate exfoliated starch-based nano-biocomposites” Biomacromolecules, Vol. 9, N°3, pp. 896-900. Abstract-Proof.

- Pogodina N., Cerclé C., Avérous L., Thomann R., Bouquey M., Muller R. (2008) « Processing and Characterization of Biodegradable Polymer Nanocomposites. Detection of Dispersion State » Rheologica Acta, Vol. 47, N°5-6, pp. 543-553. Proof-Abstract

- Bordes P., Pollet E., Bourbigot S., Avérous L. (2008) « Structure and properties of PHA/clay nano-biocomposites prepared by melt intercalation » Macromolecular chemistry & physics, Vol. 209, N°14, pp. 1473-1484.

- Chivrac F., Gueguen O., Pollet E., Ahzi S., Makradi A., Avérous L. (2008) « Micromechanical Modeling and Characterization of the Effective Properties in Starch Based Nano-Biocomposites” Acta Biomaterialia, Vol. 4, N°6, pp. 1707-1714.

- Hablot E., Zheng D., Bouquey M., Avérous L. (2008) "Polyurethanes based on Castor Oil: Kinetics, Chemical, Mechanical and Thermal Properties" Macromolecular Materials & Engineering. Vol. 293, N°11, pp. 922-929

- Schwach E., Six JL, Avérous L. (2008) “Biodegradable blends based on starch and poly(lactic acid): Comparison of different strategies and estimate of compatibilization.” Journal of Polymers and the Environment, Vol. 16, N°4, pp. 286-297.

2009

- Bordes P., Pollet E., Avérous L. (2009) « Nano-biocomposites: Biodegradable polyester/nanoclay systems » Progress in Polymer Science, Vol. 34, pp.125-155. >>Highly cited paper<<

- Belard L., Dole P., Avérous L. (2009) “Study of pseudo-multilayer structures based on starch-polycaprolactone extruded blends” Polym. Eng. Sci., Vol. 49, N°6, pp. 1177-1186.

- Avérous L., Halley P.J. (2009) « Biocomposites based on plasticized starch. » Biofuels, Bioproducts & Biorefining. Vol. 3, N°3, pp. 329-343.

- Bordes P., Hablot E., Pollet E., Avérous L. (2009) “Effect of clay organomodifiers on polyhydroxyalkanoates degradations” Polymer Degradation & Stability, Vol. 94, N°5, pp.789-796.

- Branciforti M.C., Custodio T.A., Guerrini L.M., Averous L., Bretas R.E.S. (2009) “Characterization of nano-structured poly(D,L-lactid acid) nonwoven mats obtained from different solutions by electrospinning”, Journal of Macromolecular Science, Part B, Physics, Vol. 48, pp 1222–1240.

- Chivrac F., Pollet E., Avérous L. (2009) “Progress in Nano-Biocomposites Based on Polysaccharides and Nanoclays” Materials Science & Engineering R, Vol. 67, pp. 1-17

2010

- Chivrac F., Pollet E., Avérous L. (2010) "Shear Induced Clay Organo-Modification: Application to Plasticized Starch Nano-biocomposites." Polymers for Advanced Technologies, Vol. 21, N° 8, pp. 578-583

- Chivrac F., Gueguen O., Pollet E, Averous L, Ahzi, S. and Belouettar S., (2010) “Micromechanically-based formulation of the cooperative model for the yield behavior of starch-based nano-biocomposites” Journal of Nanoscience and Nanotechnology. Vol. 10, pp. 2949–2955

- Chivrac F., Pollet E., Dole P., Avérous L. (2010) “Starch-Based Nano-Biocomposites: Plasticizer Impact on the Montmorillonite Exfoliation Process” Carbohydrate Polymers. Vol. 79, pp. 941–947

- Chivrac F., Pollet E., Schmutz M., Avérous L. (2010) “Starch nano-biocomposites based on needle-like sepiolite clays” Carbohydrate Polymers. Vol 80, pp. 145-153

- Hablot E, Matadi R, Ahzi S, Avérous L. (2010) “Renewable biocomposites of dimer fatty acid-based polyamides with cellulose fibres: thermal, physical and mechanical properties”. Composites Science and Technology, Vol. 70, pp. 504–509

- Hablot E, Matadi R, Ahzi S, Vaudemond R, Ruch D, Avérous L. (2010) “Yield behaviour of renewable biococomposites of dimer fatty acid-based polyamides with cellulose fibres”. Composites Science and Technology, Vol. 70, pp. 525–529

- Halary J.L., Avérous L., Borredon M.E., Bourbigot S., Boutevin B., Bunel C., Caillol S., Commereuc S., Duquesne S., Lecamp L., Leibler L., Pollet E., Soulié-Ziakovic C., Tournilhac F., Vaca-Garcia C., Verney V. (2010). « Polymer materials and sustainable development / Matériaux polymères et développement durable ». Actualité Chimique,Vol. 338-339. pp. 41-53

- Martino V.P., Ruseckaite R.A., Jiménez A., Averous L. (2010) "Correlation Between Composition, Structure and Properties of Poly(lactic acid) - Polyadipate Based Nano-Biocomposites" Macromolecular Materials & Engineering, Vol. 295. N°6, pp. 551-558.

- Chivrac F., Angellier-Coussy H., Guillard V., Pollet E., Avérous L. (2010) "How does water diffuse in starch/montmorillonite nano-biocomposite materials?" Carbohydrate Polymers. Vol. 82. N°1 pp. 128–135.

- Hablot E., Donnio B., Bouquey M., Avérous L. (2010) « Dimer acid-based thermoplastic bio-polyamides: reaction kinetics, properties and structure ». Polymer. Vol. 51, N°25, pp. 5895-5902

2011

- Epure V., Griffon M., Pollet E., Avérous L. (2011) "Structure and properties of glycerol plasticized chitosan obtained by mechanical kneading" Carbohydrate Polymers, Vol. 83 N°2 pp. 947-952

- Albuquerque M.G.E., Martino V., Pollet E., Avérous L., Reis M.A.M. (2011) «Mixed culture polyhydroxyalkanoate (PHA) production from volatile fatty acid (VFA)-rich streams: Effect of substrate composition and feeding regime on PHA productivity, composition and properties » Journal of Biotechnology, Vol. 151, N°1, pp. 66-76

- Matadi R., Hablot E., Wang K., Bahlouli N., Ahzi S., Avérous L. (2011) « High strain rate behaviour of renewable biocomposites based on dimer fatty acid polyamides and cellulose fibres » Composites Science and Technology. Vol. 71, pp. 674–68

- Escapa I. F., Morales V., Martino V. P.; Pollet E., Avérous L., García J. L., Prieto M. A. (2011) “Disruption of β-oxidation pathway in Pseudomonas putida KT2442 to produce new functionalized PHAs with thioester groups”, Applied Microbiology and Biotechnology, Vol. 89, N° 5, pp. 1583-1598.

- Courgneau C., Domenek S., Guinault A., Averous L., Ducruet L. (2011) « Analysis of the structure-properties relationships of different multiphase systems based on plasticized PLA. ». Journal of Polymers and the Environment. Vol. 19, N° 2, pp. 362-371

- Hablot E., Tisserand A., Bouquey M., Avérous L. (2011) “Accelerated artificial ageing of new dimer fatty acid-based polyamides” Polymer Degradation and Stability. Vol. 96, pp. 1097-1103

- Avérous L., Pollet E. (2011) “Biorenewable Nanocomposites”, MRS Bulletin, Vol. 36, N°9, pp.703-710

- Martino V.P., Jiménez A., Ruseckaite R.A., Averous L. (2011) « Structure and properties of clay nano-biocomposites based on Poly(lactic acid) plasticized with polyadipates » Polymers for Advanced Technologies, Vol. 22, pp. 2206-2213

- Martino V. P.; Pollet E., Avérous L. (2011) “Novative biomaterials based on Chitosan and Poly(epsilon-caprolactone). Elaboration of porous structures”. Journal of Polymers and the Environment. Vol. 19, N°4, pp. 819-826

- Kalia S., Dufresne A., Cherian B.M., Kaith B.S., Avérous L., Njuguna J. (2011), “Cellulose based Bio and Nanocomposites – A Review”, International Journal of Polymer Science, Vol. 2011, ID 837875, 35 p.

- Kalia S., Avérous L., Njuguna J., Dufresne A., Cherian B.M., (2011) “Natural Fibers, Bio- and Nanocomposites”, International Journal of Polymer Science, Vol. 2011, ID 735932, 2 p.

2012

- Goes A. M., Carvalho S., Oréfice R.L., Avérous L., Custódio T.A., Pimenta J.G., De B. Souza M, Branciforti M.C., Bretas R.E.S. (2012) « Viabilidade celular de nanofibras de polímeros biodegradáveis e seus nanocompositos com argila montmorilonita. / Cell viability of nanofibers from biodegradable polymers and their nanocomposites with montmorillonite » Polímeros. Vol. 22, N°1, pp. 34-41

- Courgneau C., Domenek S., Lebossé R., Guinault A., Averous L., Ducruet L. (2012). “Effect of crystallization on barrier properties of formulated polylactide” Polymer International. Vol. 61, pp. 180–189

- Xie F., Halley P.J., Avérous L. (2012) “Rheology to understand and optimize processibility, structures and properties of starch polymeric materials " Progress in Polymer Science. Vol. 37, N°4, pp. 595–62.

- Corrêa M.C.S., Branciforti, M.C., Pollet, E., Agnelli, J.A.M., Nascente, P.A.P., Avérous, L (2012) “Elaboration and characterization of nano-biocomposites based on plasticized poly(hydroxybutyrate-co-hydroxyvalerate) with organo-modified montmorillonite” Journal of Polymers and the Environment. Vol. 20, N°2, pp. 283-290

- Avérous L, Pollet E., (2012) “BIOPOL-2011: Special Issue” Polymer Degradation and Stability. Vol. 97, N°10, pp. 1851

- Ribeiro Neto W.A., Pereira I., Ayres E., De Paula A., Avérous L., Góes A., Oréfice R.L., Bretas R.E.S. (2012) “Influence of the microstructure and mechanical strength of nanofibers of biodegradable polymers with hydroxyapatite in stem cells growth. Electrospinning, characterization and cell viability.” Polymer Degradation and Stability. Vol. 97, N°10, pp. 2037-2051

- Bueno-Ferrer C., Hablot E., Garrigós M.C., Bocchini S., Averous L., Jiménez A., (2012) “Relationship between morphology, properties and degradation parameters of novative biobased thermoplastic polyurethanes obtained from dimer fatty acids” Polymer Degradation and Stability.Vol. 97, N°10, pp. 1964-1969.

- Bueno-Ferrer C., Hablot E., Perrin-Sarazin F., Garrigós M.C., Jiménez A., Averous L. (2012) “Structure and morphology of new bio-based thermoplastic polyurethanes obtained from dimeric fatty acids" Macromolecular Materials & Engineering. Vol. 297, N°8, pp. 777–784

- Amorosi C., Ball V., Bour J., Bertani P., Toniazzo V., Ruch D., Averous L., Michel M. (2012) “One step preparation of plasma based polymer films for drug release” Materials Science and Engineering C,  Vol. 32,  N°7, pp. 2103-2108

- Amorosi C., Fouquet T., Toniazzo V., Ruch D., Averous L., Ball V., Michel M. (2012) “Growth rate, morphology, chemical composition and oligomerization state of plasma polymer films made from acrylic and methacrylic acid under dielectric barrier discharge” Reactive & Functional Polymers. Vol. 72. N°5, pp. 341-348.

- Amorosi C., Michel M., Avérous L., Toniazzo V., Ruch D., Ball V. (2012) “Plasma polymer films as an alternative to (PSS-PAH)n or (PSS PDADMAC)n films to retain active enzymes in exponentially growing polyelectrolyte multilayers“ Colloids and Surfaces B: Biointerfaces . Vol. 97, pp. 124– 131

- Amorosi C., Mustin, C., Frache G., Bertani P., Fahs A., Francius G., Ruch D., Toniazzo V., Ball V., Averous L., Michel M., (2012) "Design of Flexible Free Standing Plasma Polymer-Based Films as Hosts for Enzyme Immobilization" Journal of Physical Chemistry C, Vol. 116, pp. 21356−21365

2013

- Bélard L., Poncin-Epaillard F., Dole P., Avérous L. (2013) « Plasma-polymer coatings onto different biodegradable polyesters surfaces » European Polymer Journal,  Vol. 49,  pp. 882–892

- Matet M., Heuzey MC., Pollet E., Ajjia A., Avérous L. (2013) “Innovative thermoplastic chitosan obtained by thermo-mechanical mixing with polyol plasticizers”, Carbohydrate Polymers.  Vol. 95, pp. 241–251

- Courgneau C., Ducruet V., Avérous L., Grenet J., Domenek S. (2013) “Non-isothermal crystallization kinetics of poly(L,D-lactide) - effect of plasticizers and nucleating agent “ Polymer Engineering and Science,  Vol. 53, N°5, pp. 1085–1098

- Dean K.., Sangwan P., Way C., Zhang X., Martino V. P., Xie F., Halley P., Pollet E., Avérous L. (2013) “Glycerol plasticised chitosan: A study of biodegradation via carbon dioxide evolution and nuclear magnetic resonance.” Polymer Degradation and Stability. Vol. 98, pp. 1236-1246

- Avérous L. (2013) « Polymères biodégradables et biosourcés : des matériaux pour un futur durable » L’Actualité Chimique. Vol. 375-376. pp.83-90.

- Xie F., Martino V., Sangwan P., Way C., Cash G., Pollet E., Dean K.., Halley P., Avérous L. (2013) “Elaboration and properties of plasticised chitosan-based exfoliated  nano-biocomposites” Polymer, Vol. 54, pp. 3654-3662.

- Laurichesse S., Avérous L. (2013) « Synthesis, thermal properties, rheological and mechanical behaviors of lignins- grafted-poly(ε-caprolactone) » Polymer, Vol. 54, N°15, pp. 3882–3890.

- Branciforti M.C., Corrêa M.C.S. , Pollet E., Agnelli J.A.M., Nascente P.A., Avérous L. (2013) “Crystallinity study of nano-biocomposites based on plasticized poly(hydroxybutyrate-co-hydroxyvalerate) with organo-modified montmorillonite” Polymer Testing. Vol.32, N°7, pp. 1253-1260

- Cavalheiro J.M.B., Pollet E., Diogo H.P., Cesário T., Avérous L., Almeida M.C.M.D., Fonseca M.M.R. (2013) “On the heterogeneous composition of bacterial polyhydroxyalkanoate terpolymers.” Bioresource Technology. Vol. 147, pp. 434-441.

- Xie F., Pollet E., Halley P., Avérous L. (2013) “Starch-based Nano-biocomposites” Progress in Polymer Science. Vol. 38, N°10–11, pp. 1590–1628.

2014

- Pereira I.H.L., Ayres E., Averous L., Schlatter G., Hebraud A., de Paula A.C.C., Viana P.H.L., Goes A.M., Oréfice R.L (2014) « Differentiation of human adipose-derived stem cells seeded on mineralized electrospun co-axial poly(ε-caprolactone) (PCL)/gelatin nanofibers » Journal of Materials Science: Materials in Medicine. Vol. 25, N° 4, pp 1137-1148

- Öztürk Düşkünkorur H., Pollet E., Phalip V., Güvenilir Y., Avérous L. (2014) « Lipase catalyzed synthesis of polycaprolactone and clay-based nanohybrids » Polymer. Vol. 55, N°7, pp. 1648–1655

- Laurichesse S., Avérous L. (2014) “Chemical modification of lignins: towards biobased polymers” Progress in Polymer Science. Vol. 39, N°7, pp. 1266-1290

- Laurichesse S., Huillet C., Avérous L. (2014) “Original polyols based on organosolv lignin and fatty acids: new bio-based building blocks for segmented polyurethanes synthesis” Green Chemistry. Vol. 16, N°8, pp. 3958-3970.

- Marini J., Pollet E., Avérous L., Bretas, RES (2014) « Elaboration and properties of novel biobased nanocomposites with halloysite nanotubes and thermoplastic polyurethane from dimerized fatty acids Polymer » Polymer. Vol 55, N°20, pp. 5226-5234.

- Carré C., Bonnet L., Avérous L., (2014) “Original biobased nonisocyanate polyurethanes: Solvent- and catalyst-free synthesis, thermal properties and rheological behavior” RSC Advances, Vol. 4 N°96, pp. 54018 – 54025

- Charlon M., Heinrich B., Matter Y., Couzigné E., Donnio B., Avérous L. (2014) “Synthesis, structure and properties of fully biobased thermoplastic polyurethanes, obtained from a diisocyanate based on modified dimer fatty acids, and different renewable diols”. European Polymer Journal, Vol. 61, pp.197–205

- Arbenz A., Avérous L. (2014) “Synthesis and characterization of fully biobased aromatic polyols - Oxybutylation of condensed tannins towards new macromolecular architectures." RSC Advances. Vol. 4, N°106, pp. 61564 - 61572

2015

- Pereira I.H.L., Ayres E., Averous L., Schlatter G., Hebraud A., Mendes S.T.O.L., Oréfice R. (2015) “Elaboration and characterization of coaxial electrospun poly(ξ-caprolactone)/gelatin nanofibers for biomedical applications” Advances in Polymer Technology. Vol. 33, N° S1, ID 21475, 10 p.

- Bonametti Olivato J., Marini J., Pollet E., Yamashita F., Grossmann M.V.E., Averous L. (2015) “Elaboration, morphology and properties of starch/polyester nano-biocomposites based on sepiolite clay” Carbohydrate Polymers. Vol. 118, pp. 250–256

- Oster M., Hébraud A., Pollet E., Lapp A., Avérous L., Schlatter G. (2015) « Star-pseudopolyrotaxane organized in nanoplatelet micelles for poly(ε-caprolactone)-based nanofibrous scaffolds with enhanced surface reactivity” Macromolecular Rapid Communications. Vol. 36, pp. 292−297

- Öztürk Düşkünkorur H., Bégué A., Pollet E., Phalip V., Güvenilir Y., Avérous L. (2015) “Enzymatic ring-opening (co)polymerization of lactide stereoisomers catalyzed by lipases. Toward the in situ synthesis of organic/inorganic nanohybrids." Journal of Molecular Catalysis B: Enzymatic. Vol. 115, pp. 20–28.

- Arbenz A., Avérous L. (2015) “Oxyalkylation of gambier tannin - Synthesis and characterization of ensuing biobased polyols”. Industrial Crops and Products. Vol. 67, pp. 295-304.

- Reulier M., Averous L. (2015) « Elaboration, morphology and properties of renewable thermoplastics blends, based on polyamide and polyurethane synthesized from dimer fatty acids. » European Polymer Journal, Vol. 67, pp. 418–427

- Meszynska A., Pollet E., Odelius K., Hakkarainen M., Avérous L. (2015) “Effect of oligo-hydroxyalkanoates on poly(3-hydroxybutyrate-co-4-hydroxybutyrate)-based systems”. Macromolecular Materials and Engineering, Vol. 300, N°6, pp. 561–666.

- Arbenz A., Avérous L. (2015) “Chemical modification of tannins to elaborate aromatic biobased macromolecular architectures” Green Chemistry. Vol. 67, pp. 2626-2646.

- Ribeiro Neto W.A., de Paula A.C.C., Martins T.M.M., Goes A.M., Avérous L., Schlatter G., Bretas R.E.S. (2015) “Poly (butylene adipate-co-terephthalate)/Hydroxyapatite Composite Structures for Bone Tissue Recovery” Polymer Degradation and Stability, Vol. 120, pp. 61–69

- Reulier M., Averous L. (2015) “Corrigendum to « Elaboration, morphology and properties of renewable thermoplastics blends, based on polyamide and polyurethane synthesized from dimer fatty acids. »” European Polymer Journal, Vol. 69, pp. 62-63

- Duchiron S., Pollet E., Givry S., Avérous L. (2015) “Mixed systems to assist enzymatic ring opening polymerization of lactide stereoisomers” RSC Advances. Vol. 5, pp. 84627 – 84635

- Pérez–Camargo R.A., Saenz G., Laurichesse S., Casas M.T., Puiggalí J., Avérous L., Müller A.J. (2015) ”Nucleation, crystallization and thermal fractionation of poly(ε-caprolactone)-grafted-lignin: Effects of grafted chains length and lignin content" Journal of Polymer Science, Part B: Polymer Physics. Vol. 53, N°24, pp. 1736–1750

- Carré C., Bonnet L., Avérous L., (2015) “Solvent- and catalyst-free synthesis of fully biobased nonisocyanate polyurethanes with different macromolecular architectures.” RSC Advances. Vol. 5, pp. 100390 - 100400

2016

- Reulier M., Matadi Boumbimba R., Rasselet D., Averous L. (2016) "Renewable thermoplastic multiphase systems from dimer fatty acids, with mineral microfillers" Journal of Applied Polymer Science. Vol. 133, N°8, ID N° 43055 (13 p.)

- Bellani C., Pollet E., Hebraud A., Pereira F.V., Schlatter G., Avérous L., Bretas R.E.S., Branciforti M.C. (2016) “Morphological, thermal and mechanical properties of poly(ε-caprolactone)/poly(ε-caprolactone)-grafted-cellulose nanocrystals mats produced by electrospinning” Journal of Applied Polymer Science. Vol. 133, N°21, ID N°43445 (8 p.)

- Duval A., Averous L. (2016) "Characterization and physico-chemical properties of condensed tannins from Acacia catechu" Journal of Agricultural and Food Chemistry. Vol. 64, N°8, pp. 1751-1760

- Lai J.C., Rahman W.A.W.A., Avérous L., Lim T.H. (2016) "Study and Characterization of the Post Processing Ageing of Sago Pith Waste Biocomposites" Sains Malaysiana. Vol. 45, N°4, pp. 631–639.

- Duval A., Averous L. (2016) "Oxyalkylation of condensed tannin with propylene carbonate as alternative to propylene oxide" ACS Sustainable Chemistry & Engineering. Vol. 4, N°6, pp 3103–3112

- Reulier M., Perrin R., Averous L. (2016) « Biocomposites based on chemically modified cellulose fibers with renewable fatty-acid-based thermoplastic systems: Effect of different fiber treatments. » Journal of Applied Polymer Science. Vol. 133, N°35, ID N°43878 (13p.)

- Khandal D., Pollet E., Avérous L (2016). “Elaboration and behavior of Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)- nano-biocomposites based on montmorillonite or sepiolite nanoclays.” European Polymer Journal, Vol. 81, pp. 64-76

- Debuissy, T. Pollet E., Avérous L. (2016) “Synthesis of potentially biobased copolyesters based on adipic acid and butanediols: kinetic study between 1,4- and 2,3-butanediol and their influence on crystallization and thermal properties” Polymer. Vol. 99, pp. 204-213

- Arbenz A., Frache A., Cuttica F., Avérous L. (2016) “Advanced biobased and rigid foams, based on urethane-modified isocyanurate from oxypropylated gambier tannin polyol”. Polymer Degradation and Stability. Vol. 132, pp. 62-68

- Jiménez-Quero A., Pollet E., Zhao M., Marchioni E., Averous L., Phalip V. (2016) “Itaconic and fumaric acid production from biomass hydrolysates by Aspergillus Strains” Journal of Microbiology and Biotechnology. Vol. 26, N°9, pp. 1557-1565

- Buono P., Duval A., Verge P., Averous L., Habibi Y .(2016) "New insights on the chemical modification of lignin: acetylation versus silylation" ACS Sustainable Chemistry & Engineering. Vol. 4, pp. 5212−5222

- Öztürk Düşkünkorur H., Pollet E., Phalip V., Güvenilir Y., Avérous L. (2016) “Nanoclays for lipase immobilization: Biocatalysts characterization and activity for polyester synthesis” Polymers, Vol 8, N°12, ID. N°416 (17 p.)

- Carré C., Hugo Zoccheddu H. Delalande S., Pichon P. Avérous L. (2016) “Synthesis and characterization of advanced biobased thermoplastic nonisocyanate polyurethanes, with controlled aromatic-aliphatic architectures” European Polymer Journal, Vol. 84, pp. 759–769

- Debuissy, T. Pollet E., Avérous L. (2016) "Enzymatic synthesis of a biobased copolyester from poly(butylene succinate) and poly((R)-3-hydroxybutyrate) – Study of reaction parameters on the transesterification rate." Biomacromolecules. Vol 17, N°12, pp. 4054-4063

2017

- Bonametti Olivato J., Marini J., Yamashita F., Pollet E., Grossmann M.V.E., Averous L. (2017) “Sepiolite as a promising nanoclay for nano-biocomposites based on starch and biodegradable polyester” Materials Science and Engineering C. Vol. 70, pp. 296–302.

- Gao C., Pollet E., Averous L. (2017) “Properties of glycerol-plasticized alginate films obtained by thermomechanical mixing” Food Hydrocolloids. Vol. 63, pp. 414–420.

- Gao C., Pollet E., Averous L. (2017) “Innovative plasticized alginate obtained by thermo-mechanical mixing: Effect of different biobased polyols systems” Carbohydrate Polymers. Vol. 157, pp. 669–676.

- Cano L., Pollet E., Averous L., Tercjak A. (2017) “Effect of TiO2 nanoparticles on the properties of thermoplastic chitosan-based nano-biocomposites obtained by mechanical kneading” Composites Part A. Vol. 93, pp. 33–40.

- Oyervides-Muñoz E., Pollet E., Ulrich G., Sosa-Santillan G., Avérous L. (2017) “Original method for synthesis of chitosan-based antimicrobial agent by quaternary ammonium grafting.” Carbohydrate Polymers. Vol. 157, pp. 1922-1932.

- Reulier M., Matadi Boumbimba R., Walsh Korb Z., Vaudemont R., Avérous L. (2017) “Thermo-mechanical and cyclic behavior of biocomposites based on renewable thermoplastics from dimer fatty acids.” Journal of Applied Polymer Science. Vol. 134, N° 12, ID N°44610 (13 p.).

- Debuissy, T. Pollet E., Avérous L. (2017) “Synthesis and characterization of biobased poly(butylene succinate-ran-butylene adipate). Analysis of the composition-dependent physicochemical properties” European Polymer Journal. Vol. 87, pp. 84–98

- Duchiron S., Pollet E., Givry S., Avérous L. (2017) “Enzymatic synthesis of poly(e-caprolactone -co- e-thiocaprolactone)” European Polymer Journal. Vol. 87, pp. 147–158.

- Matadi Boumbimba R., Wang, K., Hablot E., Bahlouli N., Ahzi S., Avérous L. (2017) “Renewable biocomposites based on cellulose fibers and dimer fatty acid polyamide: experiments and modeling of the stress-strain behavior” Polymer Engineering and Science. Vol. 57, N° 1, pp. 95–104

- Duval A., Couture G., Caillol S., Averous L. (2017) "Biobased and aromatic reversible thermoset networks from condensed tannins via the Diels-Alder reaction" ACS Sustainable Chemistry & Engineering. Vol. 5, N°1, pp 1199–1207.

- Pérez-Camargo R., Fernández-d'Arlas B., Cavallo D., Debuissy T., Pollet E., Avérous L., Müller A. (2017) “Tailoring the structure, morphology and crystallization of isodimorphic poly(butylene succinate-ran-butylene adipate) random copolymers by changing composition and thermal history" Macromolecules. Vol. 50, pp. 597−608

- Jiménez-Quero A., Pollet E., Zhao M., Marchioni E., Avérous L., Phalip V. (2017) “Fungal fermentation of lignocellulosic biomass for itaconic and fumaric acid production” Journal of Microbiology and Biotechnology. Vol. 27, N°1, pp. 1-8

- Buono P., Duval A., Verge P., Avérous L., Habibi Y. (2017) “Lignin-based materials through thiol - maleimide "click" polymerization” ChemSusChem. Vol. 10, N°5, pp. 984–992.

- Debuissy T., Pollet E., Avérous L. (2017) “Titanium-catalyzed transesterification as a route to the synthesis of fully biobased poly(3-hydroxybutyurate-co-butylene dicarboxylate) copolyesters, from their homopolyesters”. European Polymer Journal. Vol. 90 pp. 92-104

- Buono P., Duval A., Verge P., Avérous L., Habibi Y. (2017) “Lignin-based materials through thiol - maleimide "click" polymerization” ChemSusChem.Vol. 10, N°5, pp. 984–992.

- Debuissy T., Pollet E., Avérous L. (2017) “Titanium-catalyzed transesterification as a route to the synthesis of fully biobased poly(3-hydroxybutyurate-co-butylene dicarboxylate) copolyesters, from their homopolyesters”. European Polymer Journal. Vol. 90 pp. 92-104

- Oster M., Schlatter G., Gallet S., Baati R., Pollet E., Gaillard C., Avérous L., Fajolles C., Hébraud A. (2017) “Study of the pseudo-polyrotaxane architecture as a route for mild surface functionalization by click-chemistry of poly(ε-caprolactone)-based electrospun fibers” Journal of Materials Chemistry B. Vol. 5, pp. 2181-2189

- Debuissy T., Pollet E., Avérous L. (2017) “Synthesis and characterization of block poly(ester-ether-urethane)s from bacterial poly(3-hydroxybutyrate) oligomers.” Journal of Polymer Science, Part A: Polymer Chemistry. Vol. 55, N°11, pp. 1949-1961.

- Duval A., Avérous L. (2017) “Solvent and halogen-free modification of biobased polyphenols to introduce vinyl groups: versatile aromatic building blocks for polymer synthesis" ChemSusChem. Vol. 10, N°8, pp. 1813–1822

- Debuissy T., Pollet E., Avérous L. (2017) “Enzymatic synthesis of biobased poly(1,4-butylene succinate-ran-2,3-butylene succinate) copolyesters and characterization. Influence of 1,4- and 2,3-butanediol contents.” European Polymer Journal. Vol. 93, pp. 103–115

- Debuissy T., Pollet E., Avérous L. (2017) “Enzymatic synthesis of biobased poly(1,4-butylene succinate-ran-2,3-butylene succinate) copolyesters and characterization. Influence of 1,4- and 2,3-butanediol contents.” European Polymer Journal. Vol. 93, pp. 103–115

- Debuissy T., Pollet E., Avérous L. (2017) “Enzymatic synthesis of biobased poly(1,4-butylene succinate-ran-2,3-butylene succinate) copolyesters and characterization. Influence of 1,4- and 2,3-butanediol contents.” European Polymer Journal. Vol. 93, pp. 103–115

- Debuissy T., P. Sangwan, Pollet E., Avérous L. (2017) “Study on the structure-properties relationship of biodegradable and biobased aliphatic copolyesters based on 1,3-propanediol, 1,4-butanediol, succinic and adipic acids” Polymer. Vol. 122, pp. 105–116

- Debuissy T., Pollet E., Avérous L. (2017) “Synthesis and characterization of fully biobased poly(propylene succinate-ran-propylene adipate). Analysis of the architecture-dependent physicochemical behavior” Journal of Polymer Science, Part A: Polymer Chemistry. Vol. 55, N°17, pp. 2738–2748.

- Duval A., Avérous L. (2017) "Cyclic carbonates as safe and versatile etherifying reagents for the functionalization of lignins and tannins" ACS Sustainable Chemistry & Engineering. Vol. 5, N°8, pp 7334–7343.

- Anakabe J., Zaldua Huici A. M., Eceiza A., Arbelaiz A., Avérous L. (2017) "Combined effect of nucleating agent and plasticizer on the crystallization behaviour of polylactide" Polymer Bulletin. Vol. 74. N°12, pp 4857–4886.

- Furtwengler P., Perrin R., Redl A., Avérous L. (2017) “Synthesis and characterization of polyurethane foams derived of fully renewable polyester polyols from sorbitol.” European Polymer Journal. Vol. 97, pp. 319-327

- Debuissy T., Pollet E., Avérous L. (2017) “Lipase-catalyzed synthesis of biobased and biodegradable aliphatic copolyesters from short building blocks. Effect of the monomer length” European Polymer Journal. Vol. 97, pp. 328-337

- Avérous L., Caillol S., Cramail H. (2017) « Bio-based polymers: Main issues and perspectives (Polymères biosourcés : Principaux enjeux et perspectives) » L’actualité chimique. Vol. 422-423, pp. 68-75.

- Buono P., Duval A., Avérous L., Habibi Y. (2017) “Thermally Healable and Remendable Lignin-Based Materials Through Diels - Alder Click Polymerization” Polymer. Vol. 133, pp. 78-88.

          2018

- Duchiron S., Pollet E., Givry S., Avérous L. (2018) "Caprolactone-amino acids enzymatic copolymerization: a green route towards new functional copolyesters" Molecules. Vol. 23, N°290.

- Arbenz A., Perrin R., Avérous L. (2018) "Elaboration and properties of innovative biobased PUIR foams from microalgae" Journal of Polymers and the Environment. Vol. 26, pp 254–262.

- García-Astrain C., Avérous L. (2018) “Synthesis and evaluation of functional alginate hydrogels based on click chemistry for drug delivery” Carbohydrate Polymers. Vol. 190, pp. 271-280

- Busuioc C., Ghitulica C.D., Stoica A., Stroescu M., Voicu G., Ionita V., Averous L., Jinga S.I. (2018) “Calcium phosphates grown on bacterial cellulose template” Ceramics International. Vol 44, N°8, pp. 9433-9441

- Furtwengler P., Matadi Boumbimba R., Avérous L. (2018) "Elaboration and characterization of advanced biobased polyurethane foams presenting anisotropic behavior" Macromolecular Materials and Engineering. Vol. 303, N° 4, ID: 1700501.

- Furtwengler P., Matadi Boumbimba R., Avérous L. (2018) "Novel rigid polyisocyanurate foams from synthesized biobased polyester polyol with enhanced properties" ACS Sustainable Chemistry & Engineering. Vol. 6, N°5, pp. 6577-6589

- Furtwengler P., Avérous L. (2018) "From D-sorbitol to five-membered bis(cyclo-carbonate) as a platform molecule for the synthesis of different original biobased chemicals and polymers." Scientific Reports. Vol. 8, ID N°9134.

- Ren J., Minh Dang K., Pollet E., Avérous L. (2018) “Preparation and characterization of thermoplastic potato starch/halloysite nano-biocomposites: Effect of plasticizer nature and nanoclay content” Polymers. Vol. 10, N°808.

- Buono P., Averous L., Duval A., Habibi Y. (2018) “"Clicking" biobased polyphenols: A sustainable platform for aromatic polymeric materials”. ChemSusChem. Vol. 11, pp. 2472-2491.

- Furtwengler P., Avérous L. (2018) "Renewable polyols for advanced polyurethane foams from diverse biomass resources” Polymer Chemistry. Vol. 9, pp. 4258 – 4287

- González K., García-Astrain C., Santamaria-Echart A., Ugarte L., Avérous L., Eceiza A.Z., Gabilondo N. (2018) “Starch/graphene hydrogels via click chemistry with relevant electrical and antibacterial properties.” Carbohydrate Polymers. Vol. 202, pp. 372-381

- Prataviera R., Pollet E., Bretas R.E.S., Avérous L., Lucas A.A. (2018) “Nanocomposites based on renewable thermoplastic polyurethane and chemically modified cellulose nanocrystals with improved mechanical properties" Journal of Applied Polymer Science. Vol. 135, N°46736 (1-11)

- Magnin A., Pollet E., Phalip V., Avérous L. (2018) “Enzymatic depolymerization of polyurethanes for biorecycling process” New Biotechnology, Vol. 44, N°S138

- Ren J., Han L., Cai H., Wu K., Avérous L., Guo W. (2018) “Functional Biocomposites Based on Plasticized Starch/halloysite Nanotubes for Drug‐Release Applications” Starch-Stärke, Vol. 70, Issue 11-12, N°1700358.

- Debuissy T., Pollet E., Avérous L. (2018) "Biotic and abiotic synthesis of renewable aliphatic polyesters from short building blocks obtained from biotechnology" ChemSusChem. Vol. 11, pp. 3836 – 3870

- Ünlü C.H., Pollet E., Avérous L. (2018) “Original macromolecular architectures based on ε-caprolactone and ε-thiocaprolactone grafted onto chitosan backbone” International Journal of Molecular Sciences. Vol. 19, N°3799.

        2019

- Magnin A., Pollet E., Perrin R., Ullmann C., Persillon C., Phalip V., Avérous L. (2019) “Enzymatic recycling of thermoplastic polyurethanes: synergistic effect of an esterase and an amidase and recovery of building blocks” Waste Management. Vol. 85, pp. 141-150

- Walsh-Korb Z., Avérous L. (2019) “Recent Developments in the Conservation of Materials Properties of Historical Wood” Progress in Materials Science. Vol. 102, pp. 167-221

- Magin A., Pollet E., Phalip V., Avérous L. (2019) "Isolation and characterization of different promising fungi for biological waste management of polyurethanes" Microbial Biotechnology. DOI: 10.1111/1751-7915.13346

Book Chapters:

- Avérous L., Fringant C., Martin O. (1999), “Coextrusion of biodegradable starch-based materials” in « Biopolymer Science: Food and non food applications.», Eds : Colonna P. and Guilbert S., INRA Editions, pp. 207-212.  (ISBN : 2-7380-0874-7).

- Avérous L. (2002) “Interactions between cellulose and plasticized wheat starch. – Properties of biodegradable multiphase systems.” in “Plant biopolymer Science: Food and non-food applications”, Eds : Renard D., Della Valle G. and Popineau Y., RSC Editions (Cambridge-UK) pp. 253-259. (ISBN : 0-85404-856-1 - ISSN : 0260-6291)

- Vilpoux O., Avérous L. (2003); Plásticos a base de amido» in « Tecnologia, usos e potencialidades de tuberosas amiláceas Latino Americanas », Eds : Cereda M.P. and Vilpoux O. São Paulo: Fundação Cargill. Série Culturas de Tuberosas Latinoamericanas. Vol.3, Chapitre 18. pp. 499-529.

- Vilpoux O., Avérous L. (2004). « Starch-based plastics» in « Technology, use and potentialities of Latin American starchy tubers », Eds: Cereda M.P. and Vilpoux O.; Collection latin american starchy tubers. NGO Raízes and Cargill Foundation -São Paolo– Brazil. Book N°3, Chap 18. pp. 521-553

- Avérous L. (2008) “Polylactic acid: synthesis, properties and applications” in “Monomers, Polymers and Composites from renewable resources” Eds: Belgacem N. and Gandini A., Elsevier Limited Publication. Chap. 21. pp 433-450. (ISBN: 978-0-08-045316-3)

- Avérous L. (2008) “Multilayer Coextrusion of Starch/Biopolyester” in "Biodegradable Polymer Blends and Composites from Renewable Resources” Ed. Long Yu, John Wiley & Sons Inc., Chap. 18, pp. 441-464 (ISBN : 978-0-470146835)

- Chivrac F., Pollet E., Avérous L. (2009) “Mechanical properties of starch-based nano-biocomposites”  in “Trends in Polymer Research” Ed. G. E. Zaikov, A. Jimenez and Y.B. Monakov, Nova Publishers, Chap. 2, pp. 17-28 (ISBN : 978-1-59454-274-0)

- Bordes P., Pollet E., Avérous L. (2009) “Potential Use of Polyhydroxyalkanoate (PHA) for Biocomposites Development” in « Nano- and Biocomposites » Ed. F. Hussain, A. Kin-tak Lau and K. Lafdi, CRC Press, Taylor & Francis Group, Chap. 8, pp. 193-225 (ISBN : 978-1-420080278)

- Pollet E., Avérous L. (2010) “Recent results in Nano-Biocomposites based on Montmorillonites”  in “Advances in Polymer Nanocomposite Technology” Ed. Vikas Mittal, Nova Publishers, Chap. 11, pp. 315-354 (ISBN : 978-1-60741-970-9)

- Hablot E., Matadi R., Ahzi S., Avérous L. (2011) « Mechanical properties of dimer fatty acid-based polyamides biocomposites » in « Biodegradable Polymers and Sustainable Composites » Eds. A. Jimenez & G. E. Zaikov, Nova Publishers, Chap. 3, pp. 51-65 (ISBN : 978-1-61209-520-2)

- Öztürk H., Pollet E., Hébraud A., Avérous L. (2011) « Lipase catalyzed synthesis of biopolyester and related clay-based nanohybrids » in « Biodegradable Polymers and Sustainable Composites » Eds. A. Jimenez & G. E. Zaikov, Nova Publishers, Chap. 8, pp. 117-136 (ISBN : 978-1-61209-520-2)

- Xie F., Halley P.J., Avérous L. (2011) «  Bio-nanocomposites based on starch » in « Nanocomposites with Biodegradable Polymers: Synthesis, Properties and Future Perspectives » Ed. Vikas Mittal. Oxford University Press, Oxford, UK, Chap. 10, pp. 234-260 (ISBN : 978-0-19-958192-4).

- Avérous L. (2011) « Biocomposites based on Biodegradable Thermoplastic Polyester and Ligno-cellulose Fibers » in « Cellulose Fibers: Bio- and Nano-Polymer Composites: Green Chemistry and Technology » Eds.: Kalia S., Kaith B. S., Kaur I. John Wiley & Sons. Chap. 17, pp. 453-478 (ISBN: 978-3-642-17369-1).

- Pollet E., Avérous L. (2011) « Production, chemistry and properties of polyhydroxyalkanoates » in « Films and coatings from renewable resources – An applications perspective » Ed. D. Plackett. John Wiley & Sons. Chap. 4, pp. 65-86 (ISBN: 978-0-470-68341-5)

- Avérous L. (2012) “Starch-based sustainable materials” In « Polysaccharide Building Blocks: A Sustainable Approach to the Development of Renewable Biomaterials» Ed. Youssef Habibi &Lucian Lucia. John Wiley & Sons. Chap. 12, pp.  309-331 (ISBN: 978-0-470-87419-6)

- Avérous L. (2012) “Synthesis, Properties, Environmental and Biomedical Applications of Polylactic Acid” In “Handbook of Biopolymers and Biodegradable Plastics. Properties, Processing and Applications - 1st Edition” Ed. S. Ebnesajjad. Elsevier. Chap. 9 pp. 171-188 (ISBN: 9781455728343)

- Avérous L. Pollet E. (2012) « Green Nano-Biocomposites »In« Environmental Silicate Nano-biocomposites ». Eds. L. Avérous and E. Pollet. Springer-Verlag (London). Chap. 1, pp.1-12. (ISBN : 978-1-4471-4101-3)

- Avérous L. Pollet E., (2012) « Biodegradable Polymers » In « Environmental Silicate Nano-biocomposites ». Eds L. Avérous and E. Pollet, Springer-Verlag (London)., Chap. 2, pp. 13-40 (ISBN : 978-1-4471-4101-3)

- Pollet E., Avérous L. (2012)  « Clay Nano-biocomposites based on PBAT aromatic copolyesters »  In « Environmental Silicate Nano-biocomposites ». Eds. L. Avérous and E. Pollet. Springer-Verlag (London). Chap. 8, pp.219-236 (ISBN : 978-1-4471-4101-3)

- Avérous L., Pollet E. (2013) « Macro-, Micro-, and Nanocomposites Based on Biodegradable Polymers” dans “Handbook of Biopolymer-Based Materials: From Blends and Composites to Gels and Complex Network”. Edited by S. Thomas, D. Durand, C. Chassenieux and P. Jyotishkumar. Wiley- Verlag (London). Chap. 7, pp. 173-210 (ISBN : 978-3527328840)

- Avérous L., Halley P. (2014) « Preface » in «Polymers - From Genetic Engineering to Green Applications » Eds. Halley P., Avérous L. Elsevier (New York). pp. xviii-ixx (ISBN : 978-0-444-53730-0)

- Avérous L., Halley P. (2014) « Starch Polymers: From the Field to Industrial Products » in «Polymers - From Genetic Engineering to Green Applications » Eds. Halley P., Avérous L. Elsevier (New York). Chap. 1 pp.3-10 (ISBN : 978-0-444-53730-0)

- Avérous L. Pollet E. (2014) « Nanobiocomposites Based on Plasticized Starch » in «Polymers - From Genetic Engineering to Green Applicationss » Eds. Halley P., Avérous L. Elsevier (New York). Chap. 8 pp. 211-239 (ISBN : 978-0-444-53730-0)

- Avérous L., Halley P. (2014) « Starch Polymers: From the Field to Industrial Products » in «Starch Polymers - From Genetic Engineering to Green Applications » Eds. Halley P., Avérous L. Elsevier (New York). Chap. 1 pp.3-10 (ISBN : 978-0-444-53730-0)

- Avérous L. Pollet E. (2014) « Nanobiocomposites Based on Plasticized Starch » in «Starch Polymers - From Genetic Engineering to Green Applications » Eds. Halley P., Avérous L. Elsevier (New York). Chap. 8 pp. 211-239 (ISBN : 978-0-444-53730-0)

- Avérous L. (2014) «Formulation et mise en œuvre de matériaux multiphasés biodégradables et biosourcés : les matériaux à base d’amidon plastifié »  in « Impact environnemental des polymères et des matières plastiques - solutions et perspectives » Eds. T. Hamaide, R. Deterre & J.F. Feller. Hermes-Lavoisier (Paris). Chap. 9 pp. 209-254 (ISBN : 978-2746245402).

- Avérous L. (2014) «Formulation and Development of Biodegradable and Bio-Based Multiphase Materials: Plasticized Starch-Based Materials » in « Environmental Impact of Polymers » Eds. T. Hamaide, R. Deterre & J.F. Feller. John Wiley & Sons. Chap. 9 pp. (ISBN : 978-1-84821-621-1).

- Khandal D., Pollet E.,  Avérous L (2014). “Polyhydroxyalkanoate-based Multiphase Materials” in “Polyhydroxyalkanoate (PHA) Based Blends, Composites and Nanocomposites” Eds Ipsita Roy and Visakh P M., Royal Society of Chemistry, Chap. 6 pp. 119-140. (ISBN: 978-1-84973-946-7)

- Xie F., Pollet E., Halley P., Avérous L. (2015) « Advanced nano-biocomposites based on starch » in « Polysaccharides: bioactivity and biotechnology», Eds: Kishan Gopal Ramawat & Jean-Michel Mérillon, Springer-Verlag (London). chap. 50 pp.1-75 (ISBN: 9783319037516)

- Xie F., Avérous L., Halley P., Liu P. (2015) “Mechanical performance of starch-based bio-composites” in “Biocomposites: Design and Mechanical Performance” Eds Manjusri Misra, Jitendra Kumar Pandey & Amar Kumar Mohanty. Woodhead Publishing. Chap. 4 pp. 53-92 (ISBN : 978-1-782423942)

- Arbenz A., Avérous L. (2016) “Tannins: A resource to elaborate aromatic and biobased polymers » in « Biodegradable and bio-based polymers for Biomedical And Environmental Applications ». Eds: Susheel Kalia & Luc Avérous. Wiley & Scrivener Publishing. Chap. 4 pp. 97-148 ISBN: 978-1119117339

- Laurichesse S., Avérous L. (2016) “Towards Biobased Aromatic Polymers from Lignin” in « Biodegradable and bio-based polymers for Biomedical And Environmental Applications ». Eds: Susheel Kalia & Luc Avérous. Wiley & Scrivener Publishing. Chap. 11 pp. 387-438 ISBN: 978-1119117339

- Wierckx N., Narancic T., Eberlein C., Wei R., Drzyzga O., Magnin A., Ballerstedt H., Kenny S., Pollet E., Avérous L., O’Connor K.E., Zimmermann W., Heipieper H.J., Prieto A., Jiminez J., Blank L.M. (2018) “Plastic biodegradation: challenges and opportunities” dans “Consequences of Microbial Interactions with Hydrocarbons, Oils, and Lipids: Biodegradation and Bioremediation. Handbook of Hydrocarbon and Lipid Microbiology” Ed. Rob Steffan. Springer, pp. 1-29. DOI : 10.1007/978-3-319-44535-9-23-1 (ISBN : 978-3-319-50432-2)